Ограничитель управления пожарной стрельбы выхлопной пламени Метатель Подходит для Nissan

Condition: 100% Brand New
Item Type: Exhaust Flame Thrower
Color: Shown as Picture
Material: ABS
Size: Approx. 16 x 16 x 5cm/6.3 x 6.3 x 2.0in
Fitment: for Japanese Car
Fit for Nissan: CA18, SR18, CG13 / 10DE, SR20, RB20, RB25, RB26, VQ20 / 25/30, VG30 - All engines listed above are turbocharged and N/A retrofitted.
Fit for Subaru: All EJ20, EJ25 engines (requires 4 voltage diodes, excluded)
Fit for MITSUBUSHI: 4G63, 4G93, 4G92, 6A12, 6A13, 6G72
Fit for MAZDA: 13B, 13B-REW, B6-ZE, TURBO and N / A, 13BT
Fit for Toyota: 4AGE, 4AGZE, 4AFE, 2EET, 4EFTE, 3SGTE, 3SGE, 1ZZFE, 2ZZFE, 1GGTE, IJZGTE, 2JZGTE

1. Need a hot car for more than 10 minutes, the exhaust pipe needs to be waterless.

2. Pull the speed to 3500-6500 rpm, press and hold the switch and step on the throttle one-third to one-half, (half a second), observe the rotation speed, then the speed will be turned down from 6500, then you will hear When the fire is fired, the switch can be released and the throttle is continuously filled. At this time, the speed will be pulled back to 6500 rpm. Repeat this action to sustain the fire.

3. Repeat the above action. If the rotation speed drops to 1800 rpm, there is no fire, the switch must be released, and it cannot be “pressed” until it is turned off. In severe cases, it will damage the engine.

1 x Exhaust Flame Thrower

1 x Manual

Need a hot car for more than 10 minutes, the exhaust pipe needs to be waterless.